ethernet-doesnt-have-a-valid-ip-configuration-fixed-9-ways

Ethernet Doesn’t Have A Valid IP Configuration: Fixed [9 Ways]

Here we explore and learn how to fix Ethernet Doesn’t Have a Valid IP Configuration error that can occur due to the use of Ethernet cable:

The Internet has turned out to be a boon for the industry, making it easier for users to share data and manage records. But with the introduction of devices like the Modem and the Router, it is now effortless to provide Wi-Fi Internet connectivity at the workplaces.

Whenever numerous devices are connected to a system, there are chances of getting the error: Windows 10 Ethernet doesn’t have a valid IP configuration. In this article, we will cover this error that can occur due to using Ethernet cables, and will also learn how to fix it.

 

What You Will Learn: [hide]

  • What Is An Ethernet Cable
  • What Is Ethernet Doesn’t Have a Valid IP Configuration Error
    • Types of Ethernet Doesn’t Have a Valid IP Configuration Error Windows 10
  • Ways To Fix Ethernet Doesn’t Have a Valid IP Configuration Error
    • #1) Restart Modem/Router
    • #2) Reset TCP/IP
    • #3) Clear Network Cache
    • #4) Reinstall or Update Network Adapter Driver
    • #5) Temporarily Disable the Antivirus
    • #6) Disable Fast Startup
    • #7) Run Network Adapter Troubleshooter
    • #8) Disabling Microsoft Kernel Debug Network Adapter
    • #9) Disable IPv6
  • Frequently Asked Questions
  • Conclusion
    • Recommended Reading

What Is An Ethernet Cable

When it comes to connect systems and establish a mode of communication, it is done particularly in two ways: Physical and Wireless methods.

Wireless methods involve using wireless devices like local hotspot providers, while the Physical mode involves using wires to provide connections. The wires used to establish an Internet connection are the Ethernet cable, and they provide network communication and access to the system.

What Is Ethernet Doesn’t Have A Valid IP Configuration Error

This error means the system cannot provide the access to the Ethernet IP configuration. There are chances that due to some critical reason the system is failing to establish a connection and hence checking the IP address at both ends of the connection is necessary.

checking the IP address at both ends

Types of Ethernet Doesn’t Have a Valid IP Configuration Error Windows 10

There are various other Ethernet errors that can be experienced by the system, and they are as follows.

  1. Ethernet doesn’t work on a laptop
  2. Ethernet doesn’t have a valid connection
  3. Ethernet doesn’t have a valid config
  4. Ethernet doesn’t have IP configuration
  5. Ethernet doesn’t connect to the Internet
  6. Ethernet doesn’t have a valid IP configuration router
  7. Ethernet doesn’t have a valid IP query
  8. Ethernet doesn’t have a valid IP configuration TP-Link, Netgear
  9. Ethernet doesn’t have a valid IP configuration Powerline
  10. Ethernet doesn’t work
  11. Ethernet doesn’t have a valid IP configuration Unidentified Network
  12. Ethernet doesn’t have a valid IP address

Ways To Fix Ethernet Doesn’t Have A Valid IP Configuration Error

By following any of the methods mentioned in this article, you can get the Ethernet doesn’t have a valid IP configuration error fixed on your system.

These methods are explained below:

#1) Restart Modem/Router

One of the best ways to fix the Ethernet that doesn’t have a valid IP configuration error is to restart the Modem/Router.

Please refer to the “Restart Router” to learn how to restart your Modem/Router to fix the issue.

#2) Reset TCP/IP

The TCP/IP protocols are crucial for maintaining Internet usage and working in the most efficient way.

Follow the steps mentioned below to fix the error:

#1) Click on the “Windows” button and type “Command Prompt” in the search bar. Now right-click on the Command Prompt and click on “Run as Administrator” as shown in the image below.

Run as Administrator

#2) A black window will open as shown in the image below. Type “netsh winsock reset”.

Type “netsh winsock reset”

#3) Now type, “netsh int ip reset” and press Enter as shown in the image below. A message will be displayed stating “Restart the computer to complete this action”. Restart your system and TCP/IP will be reset.

TCP/IP reset

Thus TCP/IP protocols in the system will get reset and restored to default. By following the steps mentioned above might fix the error.

#3) Clear Network Cache

Network cache is another important reason for network-related errors. Therefore, it is advised to clear your network cache to enjoy the faster and smooth functioning of the Internet.

#1) Click on the “Windows” button and type “Command Prompt” in the search bar. Now, right-click on the Command Prompt and click on “Run as Administrator” as shown in the image below.

Run as Administrator

#2) A black window will open as shown below. Type “ipconfig/release”.

ipconfig-release - ethernet doesn't have a valid ip configuration

By following the steps above, the error might get fixed.

#4) Reinstall or Update Network Adapter Driver

Windows provide its users with the feature to update and access its drivers. Users can follow the steps mentioned below and update the Network drivers present on the system.

#1) Right-click on the Windows button and click on “Device Manager” as shown in the image below.

Device Manager

#2) Now, make a right-click on the driver and click on “Uninstall Device”.

uninstall device

#3) A window will now open as shown below. Now, click on “Uninstall”, and the driver will be uninstalled.

uninstall

#4) Right-click on the DESKTOP option and click on “Scan for hardware changes” as shown in the image below.

Scan for hardware changes

#5) In the next step, make a right-click on the driver and click on “Update driver” as shown in the image below.

Update driver

#6) Click on “Browse my computer for driver software” as shown in the image below and the driver will be updated.

Browse my computer for driver software

By following the steps mentioned in the above method, you might get the error fixed on your system.

#5) Temporarily Disable the Antivirus

There are chances that the antivirus present on your system may be a possible reason that can result in the error. Therefore, it is suggested to disable your antivirus from the settings menu and check whether the error is fixed or not.

To disable the antivirus, visit the settings of your antivirus and disable the antivirus software on your system.

Temporarily Disable the Antivirus

[image source]

This method might fix the Ethernet doesn’t have a valid IP configuration error.

#6) Disable Fast Startup

Fast Startup is a process in which the system loads the necessary files in the memory, and then it boots up the system files. This results in the error: Ethernet doesn’t have a valid IP configuration Windows 10 because some other files are not loaded. Therefore, it is advised to allow the system to boot up easily without any further error and disable fast startup on the system.

Follow the steps mentioned below to fix this error and disable the fast startup:

#1) Click on the Start button and then click on Settings>System>Power & Sleep. A window will appear as shown in the image below. Now, click on “Additional power settings”.

Additional power settings

#2) Now select “Choose what the power buttons does” (for laptops, click on “Choose what closing the lid does”). Refer to the image below.

Choose what the power buttons does

#3) In the next step, click on “Change settings that are currently unavailable”, as shown below.

Change settings that are currently unavailable

#4) Now, uncheck “Turn on fast startup” to disable it, and then click on “Save changes”, as shown in the image below.

Turn on fast startup - ethernet doesn't have a valid ip configuration

By following the steps above, the error might get fixed.

#7) Run Network Adapter Troubleshooter

Windows provides its users with the feature to locate and fix the network issues present on the system so that users can easily run the network troubleshooter on the system and fix the error by following the steps mentioned below.

#1) Search for Network troubleshooter on the search bar and click on “Identify and repair network problems”.

Identify and repair network problems

#2) Windows will launch the Network troubleshooter, which will start searching the errors present on the system. This is the best way to fix these errors.

detecting probs - ethernet doesn't have a valid ip configuration

#3) If the troubleshooter locates the problem, it will provide the fix for the error, else it will display the message “Troubleshooting couldn’t identify the problem” as shown in the image below.

Troubleshooting couldn’t identify the problem

By following the steps mentioned in the above method, you might get the error fixed on your system.

#8) Disabling Microsoft Kernel Debug Network Adapter

It is best suited to disable the Microsoft Kernel Debug Network Adapter in the settings, as it does not interfere with the network adapter installed along with the device.

Follow the steps mentioned below to disable the Kernel network adapter and fix the error:

#1) Right-click on the Windows button and click on “Device Manager” as shown in the image below

Device Manager - ethernet doesn't have a valid ip configuration

#2) Click on “View” and further click on “Show hidden devices” as shown below.

Show hidden devices

#3) Now, click on Network Adapters and then make a right-click on Microsoft Kernel Debug Network Adapter. Then click on “Disable device” as shown in the image below.

Disable device - ethernet doesn't have a valid ip configuration

By following the steps above, there are chances that the error might get fixed.

#9) Disable IPv6

The error can also be fixed by disabling the IPv6 in the settings.

Follow the steps mentioned below to disable IPv6:

#1) Right-click on the Wi-Fi option and click on “Open Network and Sharing Center”.

Open Network and Sharing center

#2) Now, click on “Change adapter settings” as shown in the image below.

Change adapter settings

#3) Locate your connection and right click on the connection and then click on “Properties”.

Properties - ethernet doesn't have a valid ip configuration

#4) Locate “Internet Protocol Version 6” as shown in the image below and uncheck it, then click on “OK”.

Internet Protocol Version 6 - ethernet doesn't have a valid ip

Reconnect to your network and check if the error is fixed.

By following any one of the methods mentioned in this article, you can get the Ethernet doesn’t have a valid IP configuration error fixed on your system.

Frequently Asked Questions

Q #1) How do I set my Ethernet IP configuration?

Answer: Users can easily set their Ethernet IP configuration by following the steps mentioned below:

  • Go to Start >> Settings >> Control Panel >> Network Connections >> Local Area Connections >> Properties.
  • Now, select Internet Protocol (TCP/IP).
  • In the next step, click on Properties.
  • Finally, select “Obtain IP Address” and the DNS address will be obtained automatically.

Q #2) How do I find my Ethernet IP address?

Answer: User can easily find their Ethernet IP address by using Command Prompt and following the steps mentioned below:

  • First, click on the Start button.
  • Then select Programs and choose Command Prompt.
  • At the C:\> prompt, enter the command “ipconfig /all” followed by the Enter key.
  • The Physical address listed will be the Ethernet address.

Q #3) How do I reset IP settings?

Answer: Follow the steps mentioned below to reset your IP address:

  • First, make a right-click on the Windows key.
  • Now, select the Command Prompt.
  • Enter “ipconfig/release” in the Command Prompt and then press the Enter button. This will release the current IP Address of the computer.
  • To renew the IP Address of your computer, enter “ipconfig/renew” and press the Enter button.

Q #4) How do I fix no IP address?

Answer: There are various reasons and methods to fix no IP address error on the system and some of them are as follows.

  • Reconnect to a network.
  • Change the encryption type.
  • Turn off MAC filtering.
  • Restart your router or a mobile device.
  • Turn flight mode on and off.
  • Assign a static IP to your device.

Q #5) How do I fix my Ethernet connection?

Answer: There are various ways to fix the Ethernet connection, some of them are mentioned below.

  • Disable fast startup
  • Set global DNS server
  • Update drivers.
  • Disable Microsoft Kernel Network Adapter.

Conclusion

In this article, we talked about the Ethernet doesn’t have a substantial IP design mistake. We likewise discussed different approaches to fix the Ethernet doesn’t have a substantial IP setup mistake.

Ethernet links end up being valuable in giving organization admittance to the gadgets and subsequently builds up a solid association between them.